Description

Polymer80 PF940V2 Jig Kit For PF940V2 Frame Blanks

This jig kit is the dedicated tooling required to complete a build using Polymer80 80% frame blanks. Designed exclusively for the PF940V2 platform, the kit includes all necessary drill bits, end mills, and alignment fixtures to properly machine the frame pockets and pin holes. As a precision-guided system, it ensures consistent results when used with a standard hand drill and drill press. The polymer80 pf940v2 jig kit for pf940v2 frame blanks is manufactured to the same tolerances as the frame itself, providing a repeatable workholding solution for the home builder.

Overview

The Polymer80 PF940V2 Jig Kit serves as the machining template for the PF940V2 frame blank. The kit includes a rigid polymer jig body, hardened steel drill bushings, and a carbide-tipped end mill. It is designed to guide the user through the three critical machining steps: locating and drilling the trigger housing pin holes, machining the fire control pocket, and drilling the locking block pin holes. Each bushing is precision-reamed to correspond with the specific hole diameter required for the frame. The jig also includes a clamping system that secures the frame blank during machining, preventing movement that could result in off-spec alignment. This polymer80 pf940v2 jig kit for pf940v2 frame blanks is the only jig that Polymer80 certifies for use with their PF940V2 frame blanks.

Features & Specs

• Precision-ground steel drill bushings indexed to PF940V2 frame geometry; includes 3/32″, 1/8″, and 5/32″ bushing sizes for trigger housing, locking block, and slide lock pin holes
• Includes two carbide-tipped end mills (1/4″ and 3/8″) for machining the fire control pocket; end mills are coated for extended life when cutting polymer composites
• Integrated clamping system with thumbscrews; jig body measures 8.25″ x 2.5″ x 1.75″ and weighs 0.9 lbs

The jig body is injection-molded from glass-filled nylon, providing dimensional stability and resistance to flex during machining. All steel components are heat-treated to Rockwell 58-60 hardness. The kit also includes a step-by-step instruction booklet covering both right-handed and left-handed configurations.

Who It’s For

This jig kit is intended for individuals who own a PF940V2 frame blank and wish to complete the frame at home using basic shop tools. It is suitable for builders with moderate experience using hand drills and drill presses. The polymer80 pf940v2 jig kit for pf940v2 frame blanks is specifically designed for the PF940V2 frame model, not for compact or subcompact variants. Users should have access to a vise, a drill press (recommended for pocket machining), and a set of standard hex wrenches. The kit does not replace the need for proper safety equipment, including eye protection and dust collection when machining polymer materials.

Shipping & FFL

This jig kit is a tool and does not contain a firearm, frame, or receiver. It ships free of shipping restrictions to all US states and territories. No Federal Firearms License (FFL) transfer is required for this jig kit. However, the PF940V2 frame blank that this jig kit is designed for is considered an unfinished receiver by the ATF. Purchasing a frame blank requires compliance with all applicable federal, state, and local laws. Customers are responsible for verifying that frame blank purchases are legal in their jurisdiction. This jig kit does not include the frame blank itself.